In this guide
Choosing the right bed for your dog is about more than just picking a cozy fabric or a stylish color. A bed that is too small will leave your dog hanging off the edges, while one that is too large might not provide the security and warmth your dog craves. The key to a perfect fit is knowing how to measure your dog properly. In this guide, we’ll walk you through the process step by step, so you can shop with confidence and give your dog the comfortable, supportive sleep they deserve.
Why Accurate Measurements Matter
Dogs come in all shapes and sizes, and so do dog beds. Manufacturers use a variety of sizing standards, which can be confusing. A “large” bed from one brand might be a “medium” in another. Without accurate measurements, you risk ending up with a bed that is either too cramped or unnecessarily bulky. Beyond just fitting your dog, measurements help ensure proper joint support, especially for growing puppies or senior dogs with arthritis. A bed that is too small can force your dog into unnatural positions, leading to discomfort or even pressure sores. Conversely, a bed that is too large might not retain your dog’s body heat, making it less inviting on cold nights.
Measuring your dog is also essential if you are purchasing a bed for a specific sleeping style—for instance, a curled-up sleeper will need a round or oval bed, while a sprawler will need a flat, rectangular one. By taking a few minutes to measure, you can match the bed’s dimensions to your dog’s actual needs, not just its breed label or weight.
Tools You’ll Need for Measuring
Fortunately, measuring your dog is a simple process that requires only a few household items. Before you start, gather the following:
- Soft measuring tape – The flexible kind used for sewing or tailoring is best. If you don’t have one, a piece of string and a rigid ruler or yardstick will work as a substitute.
- Paper and pen – To jot down the numbers as you go.
- A calm, relaxed dog – This might be the hardest part! Have treats on hand to encourage your dog to stand still or lie down as needed.
- A flat, non-slippery surface – A bare floor or a low table with a non-slip mat will help your dog stand confidently.
If you’re measuring an especially wiggly puppy or a very old dog, you may want to ask another person to help hold your dog gently but securely. Never force your dog into a position that causes stress or pain.
Step-by-Step Measuring Process
There are three primary dimensions you need to capture: length, height (at the shoulder), and width (at the chest). Optionally, you may also want to measure your dog’s weight, but the linear measurements are the most critical for bed sizing.
- Measure length (nose to base of tail) – Have your dog stand on all fours in a natural, relaxed stance. Place the measuring tape at the tip of your dog’s nose and trace along the body to the point where the tail meets the torso (not the tip of the tail). Record this number. This is the primary length measurement for most beds.
- Measure height (floor to shoulder) – While your dog is still standing, place the tape at the floor beside the front paw and measure straight up to the highest point of the shoulder blades (the withers). This gives you the “height” of your dog’s standing silhouette. This is especially important if you are considering a bed with raised edges or a donut-style bed, where your dog will rest against a bolster.
- Measure chest girth (just behind the front legs) – Wrap the measuring tape around your dog’s chest, just behind the front legs, where the ribcage is widest. Do not pull the tape too tight; you want a snug but comfortable fit. This measurement helps you understand the width your dog occupies when lying down, which is crucial for beds with side bolsters.
- Optionally: Measure your dog in a favorite sleeping position – Some dog owners find it helpful to measure their dog when lying down, especially if the dog tends to stretch out fully. If your dog has a preferred sleeping pose, measure from the tip of the nose to the tip of the tail while your dog is lying flat on its side. This gives you the “extended length” which can be used as an alternative guide.
It’s a good idea to take each measurement twice to ensure accuracy. Dogs rarely stay perfectly still, so a second reading will catch any errors. Write down the largest of the two numbers for each dimension—this ensures the bed will not be too small.
How to Use Your Measurements to Choose the Right Bed Size
Once you have your dog’s measurements, you can compare them with the dimensions provided by the bed manufacturer. However, don’t simply match the numbers exactly. Dogs need space to shift and adjust during sleep, so a good rule of thumb is to add 4 to 6 inches to both the length and width measurements for most beds.
For example, if your dog measures 24 inches in length and 18 inches in shoulder height, you should look for a bed that is at least 28 to 30 inches long and 22 to 24 inches wide. This extra “wiggle room” also prevents your dog from feeling like it’s about to roll off the edge.
To make this process easier, here’s a general reference table for common bed sizes. Keep in mind that every brand’s specific size chart may vary, so always cross-reference with your measurements.
| Bed Size | Recommended Dog Length (nose to tail base) | Recommended Dog Height (shoulder) | Typical Bed Dimensions (L x W) |
|---|---|---|---|
| Small | Up to 18 inches | Up to 12 inches | 18–24 x 18–20 inches |
| Medium | 18–24 inches | 12–18 inches | 24–30 x 20–24 inches |
| Large | 24–30 inches | 18–24 inches | 30–36 x 24–28 inches |
| Extra Large | 30–36 inches | 24–28 inches | 36–42 x 28–32 inches |
| Giant | 36+ inches | 28+ inches | 42+ x 32+ inches |
If your dog falls between two sizes, always choose the larger one. It is far better for a bed to be slightly oversized than too snug. Also, pay attention to the thickness of the bed’s padding—a thicker bed will have a higher profile, which you can factor into your height measurement if you’re concerned about your dog climbing in or out.
Additional Considerations for Specific Dog Shapes
Not all dogs are built like the “average” example. Certain breeds have unique proportions that can throw off standard measurements. For instance, dachshunds and corgis have long bodies with short legs. Their standing height is low, but their length might be substantial. When measuring a long-bodied dog, prioritize the length measurement and add a couple of extra inches, because they will often stretch out fully when sleeping.
On the other hand, deep-chested breeds like greyhounds or boxers might have a larger chest girth relative to their length. For these dogs, you need a bed with enough width to accommodate the chest when they lie on their side. If you’re choosing a bolster or donut bed, make sure the inner diameter is wide enough to let the chest rest flat, not just rest against the raised edge.
Senior dogs or those with mobility issues often benefit from a lower-profile bed with thick, orthopedic foam. In that case, you may not need to worry about height as much, but you should ensure the bed’s surface area is large enough for them to lie down or sit up without difficulty. For puppies, remember that they will grow—if you’re buying a bed for a young dog, consider a size that you can use for the next year or two, or plan to replace it as they outgrow it.
Common Mistakes to Avoid
Many well-meaning owners make mistakes when measuring their dogs, leading to disappointing purchases. Here are a few pitfalls to sidestep:
- Measuring the tail – Dogs often tuck or wag their tails, so including the tail length will overestimate the bed size. Stick to the base of the tail as your endpoint.
- Using a weight chart alone – While weight can be a helpful guideline, two dogs of the same weight can have completely different body shapes. A lean 50-pound dog may need a smaller bed than a barrel-chested 50-pound dog. Always verify with tape measurements.
- Forgetting to add the extra inches – As mentioned, a bed that exactly matches your dog’s body length will feel cramped. Always add 4–6 inches for comfort.
- Not accounting for bolster height – If you choose a bed with high sides, take your dog’s shoulder height into account. A dog that prefers to rest its head on the edge will need a bolster that is slightly lower than its shoulder height when lying down.
- Measuring a dog that is lying down incorrectly – If you’re measuring your dog while it’s lying down, make sure it is fully stretched out, not curled. Otherwise, you’ll get a too-small number.
- Ignoring your dog’s sleeping style – A “curler” can get away with a round bed that matches its curled diameter, but a “sprawler” needs a longer, flatter surface. Measure your dog in both standing and lying positions if you’re unsure.
Measuring your dog for a new bed is a straightforward task that takes less than five minutes but saves you from the frustration of returns and the discomfort of your dog. Always double-check the manufacturer’s size guide before purchasing, and if you’re shopping online, look for a bed with a generous return policy just in case. Your dog will thank you with many restful nights and happy, healthy sleep.



